how to remove air from a pool vacuum?

Table of Contents

There are many reasons why a pool vacuum may have air in it. From time to time, debris may get sucked in and block the air filter. This can cause the vacuum to work harder and wear out more quickly. If you notice your pool vacuum is not pulling as well as it used to, there are a few simple steps you can take to remove the air and get your pool vacuum back to working like new.

1: Remove All Connections to the Pool Vacuum

If you simply detach the hose from the vacuum, you will likely release all of the air insides. If there is still some air inside the vacuum, use a can of compressed air to expel it.

2: Open The Hose Connection

If your vacuum has a hose connection, open it by unscrewing the base. Be careful not to lose any of the debris that may be inside the hose.

3: Pull Out The Air Tube

On most pool vacuum models, there is an air tube that runs from the pump to the motor. Once you’ve opened the hose connection, you can pull out this tube. This will allow the vacuum to operate without any air in the system.

4: Release The Pressure In The Vacuum Bag

If the vacuum has a bag, you’ll need to release the pressure by opening the valve on the side of the bag. This will allow any remaining air to escape.

5: Reattach The Vacuum Hose To The Vacuum

Once the air is gone, you can reattach the hose by screwing on the base and reconnecting the hose to the vacuum.

6: Test Your Vacuum For Air Leaks

Now that the vacuum is free of air, test it for leaks by running it over your debris. If there are any leaks, fix them before using the vacuum.

7: Replace The Filter And Sealant If Needed

If your vacuum doesn’t operate properly because of air leaks, you may need to replace the filter and sealant. Follow the manufacturer’s instructions for doing this.

What are the Symptoms of A Pool Vacuum With Air In It?

 A pool vacuum with air in it will not be as effective at sucking up debris. The vacuum will also work harder to try and clear the debris, and the filter may become clogged more quickly. If the vacuum is not working, you may notice an increase in algae and bacteria on the walls of the pool. The vacuum could also be creating a cloudy appearance to the water. In extreme cases, you may even see small fish swimming around in circles or bubbles floating on top of the water. If you suspect that your pool vacuum has air in it, it is important to take action immediately to correct the issue.

Conclusion: These are the steps that will help you remove air from your pool vacuum. By following these steps, you will be able to restore full functionality to your vacuum and avoid any potential damage or leaks.